Work Site Gloves

Work Site Gloves

$6.70
$6.70

savings 6-packs save 10% · 12-packs save 15% + FREE shipping on 12+ pairs

BUNDLE & SAVE

 
add_shopping_cart

-

Ordered

local_shipping

- - -

Order Ready

redeem

- - -

Delivered

Work Site Gloves

Work Site Gloves

$6.70
$6.70

Heavy duty cut resistant work gloves built for Australian and New Zealand trades. Work Site Gloves are ideal for bricklaying — and far from limited to it. Concreting, steel fixing, scaffolding, demolition, landscaping, warehouse and general site labouring: one glove, certified EN 388 4X43F (ISO 13997 Cut Level F, ANSI/ISEA A5, CE Cat II, AS/NZS 2161.3:2020), does the lot.

Built to last 40+ hours of hard use per pair. Where throwaway gloves blow out in a shift or two, the 13-gauge HPPE liner and sandy nitrile palm keep working — with intentional added reinforcement around the thumb webbing and forefinger, the first places bricks, blocks and steel chew through ordinary gloves.

  • Cut protection to EN 388 Level F — the highest EN rating made; anti-cut security for blade, mesh and sheet-edge work
  • Reinforced thumb & forefinger — built for the wear points of brick and blockwork
  • 40+ hours of hard use per pair — keeps going where disposable gloves give out
  • Sandy nitrile grip palm — locks on in dry, wet and oily conditions
  • 13G HPPE liner — breathable, low-fatigue, full dexterity
  • Certified: EN 388 4X43F | ANSI A5 | CE Category II | AS/NZS 2161.3:2020
  • Sizes M–XXL — snug elastic knit wrist keeps debris out

After rigger gloves? Work Site Gloves are the modern cut-resistant alternative — the same hard-wearing site grip, plus certified Level F blade protection that traditional leather riggers can't offer, in a lighter glove your hands won't fight all day.

Buy in bulk and save. Single pairs, or bulk work glove packs of 6 (save 10%) and 12 (save 15%) — free shipping on every bulk pack, Australia and New Zealand wide.

verified_user

Glove Specifications

Material: 13G HPPE cut-resistant liner with sandy nitrile palm coating
Reinforcement: Intentionally reinforced thumb webbing and forefinger — the first areas to wear on brick, block and steel work
Durability: Built to last 40+ hours of hard use per pair
Protection Rating: EN 388 4X43F — Abrasion 4 / Tear 4 / Puncture 3 / Cut Level F
Certification: ANSI/ISEA Cut Level A5 | CE Category II | AS/NZS 2161.3:2020
Grip: Sandy nitrile palm — reliable on dry, wet, and oily surfaces
Closure: Elastic knit wrist — secure fit, keeps debris out
Care: Hand wash cold, lay flat to dry
Sizes: M, L, XL, XXL

Standard shipping: 3–7 business days across Australia & New Zealand
Free shipping: Orders of 12 pairs or more
Faulty items: Remedies apply under Australian Consumer Law. Customers are responsible for return shipping except where applicable law requires otherwise.
Change of mind: Returns and exchanges accepted within 30 days (unused, original packaging). A 30% restocking fee applies.

View full details

How Ordering Works

From Cart To Site In 4 Steps

  • Pick Your SizeM to XXL
  • Choose Single Or Bulk1 pair, 6-pack or 12-pack
  • Add To CartSecure checkout
  • Fast AU & NZ DeliveryFree on 12+ pairs

Quick Guide

Sizing, Care & Standards

M18–20 cm palm
L20–23 cm palm
XL23–25 cm palm
XXL25–28 cm palm

Measure around the widest part of your palm, excluding the thumb. Between sizes? Size up for a more comfortable fit. Full size guide here.

Hand wash cold, lay flat to dry. Skip the tumble dryer and direct heat — it can stiffen the nitrile palm over time. Give the palm a quick check after heavy use, and retire a pair once the coating cracks or wears through.

EN 388 4X43F ANSI/ISEA A5 CE Category II AS/NZS 2161.3:2020

Independently tested and certified. View our certification documents.

Built To Last Across Tough Trades

Estimated working life per pair by task, based on construction and reinforcement.

General site labouring
~45 hrs
Bricklaying & blockwork
40–45 hrsIDEAL
Concreting & formwork
~40 hrs
Steel fixing & scaffolding
~35 hrs
Demolition & rubble
~30 hrs

Estimates based on glove construction and reinforcement, not laboratory testing. Actual working life varies with task, conditions and handling.

Real site wear

What glove wear looks like in the real world

Original field photos from different Sitegrips pairs and workers. These are examples of fresh, in-service and end-of-life condition—not one pair photographed over time.

Fresh Sitegrips glove with an even black palm coating
Fresh pair

Ready for site

Even palm coating with no visible splits, tears or exposed liner.

Sitegrips gloves showing dusty palm and finger wear during construction work
In service

Working wear

Dust and surface abrasion are visible. Check the palm, fingers and thumb web before each use.

Heavily worn Sitegrips gloves with holes through several coated fingers
Replace now

End of service

Retire the pair when holes, tears or exposed skin appear. Do not keep working in damaged gloves.

Wear rate varies with the task, materials, conditions, handling and care. Inspect gloves before use.

Reinforced Where Tradies Need It

Every pair carries intentional added reinforcement around the thumb and forefinger contact areas — where bricks, blocks and steel chew through ordinary gloves first.

check_circle
Thumb Webbing Reinforcement

Extra material through the thumb webbing stops blowouts when gripping brick edges and block webs all day.

check_circle
Forefinger Wear Guard

Reinforced forefinger holds up to pointing, jointing and repetitive pick-and-place on abrasive surfaces.

check_circle
40+ Hour Working Life

Built to last 40+ hours of hard use — bricklaying, concreting and demolition included.

check_circle
Snug, Low-Fatigue Fit

13-gauge knit moves with your hand, so there’s less grip force and less fatigue at knock-off.

construction
Ideal For Bricklaying — And Beyond

Built for brick and blockwork, and proven on concreting, steel fixing, scaffolding, demolition and general site labour.

healing
Reinforced Thumb & Forefinger

Intentional added reinforcement around the thumb webbing and forefinger — the first wear points on brick, block and steel.

timer
40+ Hours Of Hard Use

Built to last 40+ hours of hard use per pair — they keep going shift after shift where disposable gloves give out.

Built To Go The Distance

Most site gloves are dead in a day or two. Work Site Gloves pair a 13-gauge HPPE cut-resistant liner with a sandy nitrile grip palm and reinforced high-wear zones, so you re-wear them shift after shift — and your hands stay protected to EN388 Cut Level F the whole time.

See Our Certifications

Customer reviews

Be the first to review SiteGrips

Have you used our Work Site Gloves? Share an honest review to help other customers choose with confidence.

Reviews are checked for genuine customer experience. Your email and order number will not be published.

Before You Order

Common Questions From Tradies

What cut level do these gloves protect against?

EN388 4X43F — Cut Level F, the highest rating on the scale. Independently tested and certified. See what the numbers mean.

Do they grip when wet, oily or dusty?

Yes. The sandy nitrile palm holds on to slick brick, wet formwork and oily steel — not just dry surfaces.

Should I get a single pair or a bulk pack?

Most tradies go straight to a 6 or 12-pack. The 6-pack saves 10%, the 12-pack saves 15%, and orders of 12 pairs or more ship free. A single pair is there if you just want to try them first.

How long does a pair last?

Built to handle 40+ hours of hard use per pair on site — not a one-shift disposable glove.

What if they don’t fit?

Check our size guide before you order. Wrong size? Exchanges are accepted within 30 days (a 30% restocking fee applies to change-of-mind swaps).